Darbas metodas
Avinžirniai šlifavimas mašina pulverizeris su dideliu talpa milteliai pulverizatorius mašina uses the high-speed relative movement between the movable blade and the fixed blades to crush the material by the impact of the teeth, shear, friction and collision between the materials to achieve the purpose of crushing materials. Susmulkintos medžiagos pagal the role of rotating centrifugal force and the induced fan, into the cyclone separation chamber, after the fan off the material, dust into the pulse dust box, through the filter cartridge after recycling. The size of powder particle size size can be gauta by renkantis different diafragma screen.
1)Kai talpa yra mažas, viengubas malūnas mašina is labai tinkamas.
2)The single mill is easy to clean, simple in structure and few užimta space.
3)Kaina yra žema,it gali taip pat išspręsti the problem of tight budget.
4)Priėmimas pažangus pasaulis garsus prekės ženklas komponentai pneumatiniai dalys - 2 elektrinės dalys ir operacija dalys.
|
Modelis |
MMJ-400 |
MMJ-630 |
MMJ-1000 |
MMJ-1200 |
|
Talpa(kg/h) |
100-300 |
20-500 |
300-800 |
400-1000 |
|
Pašarų dydis (mm) |
Mažiau nei arba lygu iki 20 |
Mažiau nei arba lygu į 25 |
Mažiau nei arba lygu iki 30 |
Mažiau nei arba lygu iki 30 |
|
Crush size(mesh) |
20-100 |
20-100 |
20-100 |
20-100 |
|
Šlifavimas variklis eurų. |
18.5 |
30 |
45 |
55 |
|
Iškrova galia eurų. |
0.75 |
0.75 |
1.5 |
1.5 |
|
Ventiliatorius variklis eurų. |
11 |
15 |
22 |
37 |
|
Pagrindinis greitis(aps./min.) |
4500 |
4300 |
3500 |
3000 |
|
Matmenys (L*W*H mm) |
5400×1100×2700 |
6800×1300×2900 |
7800*1600*3200 |
8800*1800*3500 |
|
Svoris(kg) |
900 |
1500 |
1900 |
2200 |
Komponuota išpašarų bunkerio, pagrindinio variklio, ir frezavimo kameros. Medžiaga yra susmulkinta į miltelių viduje smulkintuvas kamera. Tada enter the cyclone discharge section.
You can change differenr size of screen to get different size of powder. From 20-100mesh.
Ciklonas Iškrova Dalis
Pagalba į Atskirti Dulkės nuo milteliai. Due to the action of the fan, the interior of the cyclone is in a vacuum state. The powder will be continuously discharged through the discharge motor. Some too fine powder will enter the dust removal box. Avoid dust entering the room. Meet GMP standards.
The dust removal box can collect dust. It contains a needle punched anti-static cloth bag. When the dust enters the dust removal box, it adsorbs on the surface without any surface. Then the pulse air hammer will automatically hit the bag and cause it to fall off. You can open the valve at the bottom of the box every day to clean it.
Populiarus Žymos: avinžirniai malimas mašina pulverizeris, Kinija avinžirniai šlifavimas mašina pulverizeris gamintojai, tiekėjai